| |
|
| |
 |
 |
|
 |
|
| |
|
|
|
| ALS
206 |
| Technical
Data |
|
Dispensing speed
|
Up to 30 m/minm |
| Labels |
Material: self-adhesive label
material with liner
Winding direction: Inside/outside possible
Unwinder roll diameter: 300 mm
Unwinder roll diameter: 200 mm
Core diameter 1.5” / 3” / 4”,
Material width incl. backing paper: 10 - 160 mm
Label length: 5 - 600 mm |
| Label Accuracy |
at dispensing edge +/- 0.5 mm |
| Electronics |
Processor: 32 Bit CPU (MIPS),
RAM 16 MByte, ROM 4 MByte
Card slots: Slot for one CF-card or WLAN-card
Control panel: Graphical display 128 x 32 dots, 2 lines, 5 push buttons |
| Data Interfaces |
Serial: 1x RS232C,
D-Sub 9, max. 115200 Baud
Ethernet: 1x 10/100 Base T/TX RJ45
USB: 1x device V1.1, USB-B
Remote Display: 1x RS422 (Mini-DIN 6)
Internal interfaces for: Applicator interface (optional),
RFID reader (optional) |
| SPS/PLC Interfaces |
Output: 4 x
PNP, 24 V, max. 500 mA/Kanal
Total max.: 1500 mA
Input: 3 x PNP/NPN, 24 V |
| External sensor interfaces |
Opto-isolated:
4-pin M12 connectors
Label sensor: Wenglor OPT01N optical
or alternate sensors: PNP/NPN, 24 V
Product sensor: PNP/NPN, 24 V
APSF sensor: Single/bi-phase, PNP, 24 V
OD-sensor: PNP, 24 V |
| Status messages/Test
functions |
Dispensing stops:
when label stock ends or missing
label counter is exceeded
Test functions: automatic diagnosis after powering
on |
| Dimension/Environment |
H x W
x D (mm): 490 x 490 x 390
Weight: 38 kg
Mains voltage / power consumption: 110/230 V AC
/ 460 VA,
Operating temperature: 5 - 40 °C
Humidity: 30 - 85%, not condensing,
Qualification: CE, TÜV/GS, FCC, CCC, GOST,
NRTL (US/CA) |
| Options |
L-shape dispensing edge,
V-shape dispensing edge, RFID-Kit*
external OD sensor, different sensors and applicators,
external remote controll display |
|
|
|
|
|
|
|
| |
|
|
 |
|